Uwell Caliburn G3 Pod System Kit Review

Introduction

The Uwell CALIBURN G3 Pod System Kit is a compact pod kit in Uwell’s CALIBURN line. It pairs a 900mAh battery with 2.5ml or 2ml pods, depending on the regional version, and a maximum output of 25W. The kit is designed for MTL and restricted direct-to-lung (RDL) vaping through 0.6ohm and 0.9ohm integrated coil cartridges. It also adds a dual airflow system and an OLED display, which are not always present on small pod systems.

This refresh is based on the specifications and design details already recorded in the original review. No hands-on test results are added. The assessment below focuses on what the published specs suggest, the design choices, and the types of vapers most likely to benefit from the kit.

Uwell offers the CALIBURN G3 in six colors: Silver, Gray, Black, Red, Green, and Blue.

Specifications

The original review lists these specifications for the Uwell CALIBURN G3 Pod System Kit:

• Dimensions: 115.5mm by 24mm by 13.9mm
• Net weight: 47g
• Battery capacity: 900mAh
• E-liquid capacity: 2.5ml for INT and FDA versions, 2ml for TPD versions
• Output power: maximum 25W
• Cartridge material: PCTG
• Device material: aluminum alloy
• Coil cartridges: FeCrAl meshed 0.6ohm and 0.9ohm CALIBURN G3 integrated coil cartridges
• Refill style: side refill for INT and FDA versions, top refill for TPD versions
• Charging: Type-C
• Kit contents: CALIBURN G3 device, one 0.6ohm cartridge, one 0.9ohm cartridge, Type-C charging cable, lanyard, and user manual

These figures match the product facts supplied with the review, including the 2.5mL pod capacity, 0.6ohm and 0.9ohm coil options, integrated coil installation, and 25W maximum output.

Design and Build

The CALIBURN G3 uses an aluminum alloy body. The original review describes the device as sturdy in the hand, with clean lines and a comfortable grip. The overall dimensions of 115.5mm by 24mm by 13.9mm and a 47g weight keep the kit light enough for daily carry.

The wider ClearView juice window is one of the design details mentioned in the review. It allows the user to check the remaining e-liquid level without removing the cartridge from the device. For a pod system, that is a practical feature because it reduces the need to pull the pod out just to see how much liquid is left.

The included lanyard is another carry-related accessory. It attaches to the device so the user can keep the kit within reach instead of storing it in a pocket or bag.

Features and Performance

The CALIBURN G3 uses a dual airflow system. The user can adjust airflow to move between a tighter MTL draw and a more open RDL draw. This is a useful feature for a single device aimed at two popular vaping styles, since it lets the same kit cover different preferences without changing hardware.

The 0.6ohm and 0.9ohm integrated coil cartridges give the user two coil choices. A 0.6ohm coil generally favors a more open draw and a warmer vape, while a 0.9ohm coil tends to suit a tighter MTL draw with lower power. The original review describes both coils as supporting flavor and vapor production. The dual coil selection is one of the reasons the kit can serve both beginners and more experienced vapers.

The kit also includes an OLED display. According to the review, the display supports precise power adjustment, puff recording, and three trigger modes, with a large trigger button for operation. This adds a level of control that many small pod kits do not include. The user can adjust power rather than being limited to a fixed output from the coil.

The e-liquid capacity is 2.5ml for the INT and FDA versions and 2ml for TPD versions. That capacity is reasonable for a compact pod system and should reduce the need for constant refills during a day of moderate use. The 900mAh battery is described in the review as a 20% increase over the previous CALIBURN G2, which is notable for a device in this size range. For moderate use, the battery should cover a full day on a single charge.

Charging is handled through a Type-C cable, which the review says provides fast and easy charging. The included lanyard adds a simple way to carry the device hands-free.

Uwell’s Pro-FOCS flavor technology is mentioned in the original review as part of the device’s approach to flavor delivery. The review also notes two cartridge styles: top refill and side refill. Top refill cartridges require removing the mouthpiece, which can reduce the risk of leaking, while side refill cartridges are quicker to access. Which style is available can depend on local channels and the regional version of the product.

Advantages and Disadvantages

Based on the listed specifications and the original review notes, the main points are:

Advantages

• Dual airflow system allows users to tune between MTL and RDL draws
• Two coil options, 0.6ohm and 0.9ohm, cover different vaping styles
• 900mAh battery offers a 20% capacity increase over the CALIBURN G2
• OLED display adds power adjustment, puff recording, and three trigger modes
• ClearView juice window makes it easy to check e-liquid levels
• Lightweight aluminum alloy body and included lanyard support portability
• Type-C charging should reduce time spent waiting for a recharge

Disadvantages

• E-liquid capacity is limited to 2.5ml or 2ml depending on the regional version
• Cartridge refill style can vary by region, so users may not always have a choice between top and side refill
• A 900mAh battery may require recharging during the day for heavier users
• The OLED display and trigger modes add controls that may feel unnecessary for users who want a very simple pod kit

Final Verdict

The Uwell CALIBURN G3 Pod System Kit is a compact pod system that covers both MTL and RDL vaping with a dual airflow system and two integrated coil cartridges. The OLED display, power adjustment, and three trigger modes give it more control than a basic draw-activated pod kit, while the 900mAh battery and Type-C charging keep it practical for daily carry. The kit is most suitable for users who want a small device with coil options and adjustable power but do not need a large tank.

Buy If

• You want a compact pod kit with both MTL and RDL airflow options
• You prefer having 0.6ohm and 0.9ohm integrated coil cartridges in the box
• You want an OLED display with power adjustment, puff recording, and trigger modes on a small device

Skip If

• You want a larger e-liquid capacity or a longer battery life for all-day heavy vaping
• You prefer the simplest possible pod system without a screen or multiple trigger modes
• You need a specific refill style and cannot rely on what is available through local channels